Saturday 31 December 2011

Samsung 3G/2G Tool 11.9 released.


Added full support for P6210 (Flash, Unlock/Read codes, IMEI repairfirst in the world
- Added full support for S5690 (Flash, Unlock/Read codes, IMEI repairfirst in the world
- Added full support for T859 (Flash, Unlock/Read codes, IMEI repairfirst in the world
- Added full support for S5360B (Flash, Unlock/Read codes, IMEI repair)
- Added full support for S5360L (Flash, Unlock/Read codes, IMEI repair)
- Added full support for S5570I (Flash, Unlock/Read codes, IMEI repair)
- Added full support for S5830I (Flash, Unlock/Read codes, IMEI repair)
- Added support for S5838 (Unlock, IMEI repair)

How To – Fix Error 1015 on Restore of iOS 4.3.1

fix details  please click here............

                          http://www.smoothblog.co.uk/2011/04/08/fix-error-1015-restore-ios-431/

Wednesday 21 December 2011

Unlock iPhone 4 / 3GS on 5.0.1 with Ultrasn0w 1.2.5 [Tutorial]


How to jailbreak and unlock iPhone 4 / 3GS on 5.0.1 with Ultrasn0w 1.2.5 and Redsn0w 0.9.9 b9d ? Well, couple of days ago we reported you that iPhone Dev-team will release ultrasnOw 1.2.5 to unlock iPhone 4 and iPhone 3GS on iOS 5.0.1 by Monday, but it looks we have early release for ultrasn0w 1.2.5.

As we told you earlier that ultraslOw 1.2.5 is only minor update to unlock the already unlockable basebands on iOS 5.0.1 for iPhone 4 and iPhone 3GS.


Ultrasn0w 1.2.5 support the below basebands :
  • 01.59.00
  • 04.26.08
  • 05.11.07
  • 05.12.01
  • 05.13.04
  • 06.15.00
How to know your iPhone's baseband version ? Go to Settings > General > About > Modem Firmware


Required Downloads:

To unlock iPhone 4, 3GS with ultrasnOw 1.2.5 on iOS 5.0.1 you have to know that :



You MUST jailbreak your iPhone 4 or iPhone 3GS with Redsn0w or sn0wbreeze using custom ipsw firmware to preserve your old basebands to be able to unlock your iPhone with ultrasn0w 1.2.5. If you are using Gevey SIM you can follow this guide.




How to Unlock iPhone 4, 3G 5.0.1 with Ultrasn0w 1.2.5 [Tutorial]



Step 1: Connect your iDevice with your PC via USB and open Redns0w you just downloaded above.


Step 2: Start Redsn0w, press on "Extras" > "Custom IPSW" and then point Redns0w to iOS 5.0.1 ipsw firmware that you downloaded above.
 
Now Redsn0w will start cooking your custom iOS 5 ipsw firmware
Step 3: Click on "Pwned DFU"


Step 4: Now make sure your device is both OFF and PLUGGED IN to the computer before you click “Next”.
At this stage you will be presented with a screen where you will be guided on how to enter DFU mode. Quickly hold “Power” button and then while holding the “Power” button, you will now have to hold “Home” button too. Now after few seconds release “Power” button but keep holding “Home” button until installation begins.


Step 5: Open iTunes then Restore your iPhone 4, 3GS to the Custom iOS 5.0.1 ipsw (the file name begins with NO_BB).


Step 6: Now Open Cydia > Manage > Sources > Edit > Add then write the following repo :
http://repo666.ultrasn0w.com
 


Step 7: After installing this repo, tab on search and search for ultrasnOw then install it.




Congratulation, now you have unlocked iPhone 4, 3GS on 5.0.1 using ultrasn0w 1.2.5.

Saturday 17 December 2011

TinyCFW: Create a custom IPSW for iPad2 and iPhone4

TinyCFW is a simple tool I put together for a friend of mine. He has an iPad2 GSM and has his 4.3.3 SHSH but since Apple is no longer signing 4.3.3, it isn't possible to downgrade to 4.3.3 without getting stuck in a 1015 recovery loop.
What TinyCFW is:

  • It will modify an existing ipsw for an ipad2 gsm/cdma or iphone4 gsm/cdma
  • It WILL modify the ipsw TO UPDATE YOUR BASEBAND TO THE LATEST!
  • It will create an ipsw that you can use with TinyUmbrella AND iTunes to restore to a version of iOS that you have SHSHs for.
  • It is primarily for iPad2 with a baseband OR iPhone 4.
What TinyCFW is NOT:
  • A jailbreak
  • An unlock
  • A tool to protect your baseband.
  • A tool that will restore your device to any firmware
  • A tool for use with iPhone 3GS, iPhone 3G, iPad, or iPhone 4S
The usage is simple. Start the application (double click on the jar or run the .exe file). You must have java and at least 2.5gb ram. (Yes I know. It's a lot. Get over it. I didn't write this to be massively distributed. I wrote this for a friend and am now just sharing it with everyone). Once the window comes up, click the top button and choose an ipsw for which you have SHSHs for. The app will scan it and tell you the firmware and baseband versions in the ipsw you selected and the firmware and baseband versions that will be in the target ipsw when you click the second button. If you're ready, click 'Save Target IPSW'. This will take a minute or two and when it is finished, you will have a file named:

<your original ipsw name>.bbupdate.ipsw.

You can use this ipsw with iTunes and TinyUmbrella to restore your iPad2 GSM/CDMA back to say 4.3.3 (if you have 4.3.3 SHSH).

This is a VERY initial release. I never intended on it being a massively supported tool. It's just something I used in passing. If it helps you great! This functionality will exist in far more robust form when I finally ever release TinyPwn.

Wednesday 14 December 2011

GPG DRAGON ....Error: Your software has been restricted..??......100% SOLUTION HERE!!

F YOU FACE THIS ERROR IN DRAGON SOFTWARE... IT MEANS SOMETHINK GONE WRONG WITH YOUR SYSTEM OS.

BUT BEFORE THAT YOU SHOULD CHECK THIS WAY, STEP BY STEP GUIDE HERE....

FOLLOW THIS..


Step One Use Lastest Version DRAGON SOFTWARE AND BOX FIRMWARE. bcz IF YOU CONNECT INTERNET IT WILL SEARCH AND RESTRICT OLD VERSION. SO ALWAYS UPDATE WITH US!



IF STILL PROBLEM PERSIST........DO LIKE THIS..


2 : Uninstall GPG File Or Delete

Then Go To Start- Run-Cmd

Type- Regedit- Search(Control+F Key)

GpgDragon Without Space

3 : After The Search CleanUp All Dragon Related Files Use this

ccleaner for Registry cleaning and Third-party applications.



4 : Then restart system.

Check Your Pc Time Zone, Date and Time, And Correct It.




Check Your Pc Time Zone, Date and Time, And Correct It...


After This
Download latest DRAGON SOFTWARE and Update Your Box Firmware.


Still this error shows.. No Other Way

FORMAT AND REINSTALL NEW OS AND DO STEP 4 .

blackberry hardware tips

iPhone 3GS ver. 5.0.1 BB 6.15 Unlock Manually Patch Procedure inside

INFO:
iPhone 3GS 16GB
AT&T Lock
Version 5.0.1 (CFW using Sn0wbreeze to preserve baseband)




Files Needed:
Install
 iFile : Open Cydia>Manage>Sources>Edit>Add and add repo.insanelyi.com
iFunbox

CommCenterClassic For 3GS : iPhone 3gs 5.0.1fix.rar
Mirror (Hotfile): Hotfile.com: One click file hosting: iPhone 3gs 5.0.1fix.rar

Procedure:

1. Connect your iPhone to PC
2. Open iFunbox 

Go to :
>Raw File System/System/Library/Frameworks/CoreTelephony.framework/Support/
>Delete or Back-up CommCenterClassic
>And COPY the new one
>Close iFunbox

SCREEN SHOT:

3. Open iFile 
Go to :
>System/Library/Frameworks/CoreTelephony.framework/Support/commcentreclassic
>Click the Blue arrow next to the file name


>Go to Access Permissions

>SET the Following:

User : Read, Write, Execute
Group : Read, Execute
World : Read, Execute

>Tap Done

4. Install Ultrasn0w from Cydia and reboot your device
Note: 5.0.1 is still tethered
 on new bottrom and iPhone 4

Finish Product:



I Only tried and Test it on iPhone 3GS


iPhone 4 User same procedure.

CommCenterClassic for iPhone 4 
:iPhone 4 5.0.1 fix.rar
Mirror (Hotfile):Hotfile.com: One click file hosting: iPhone 4 5.0.1 fix.rar

Tuesday 13 December 2011

MXKEY/MXBOX v3.5 revision 1.6, Public-Release

MXKEY/MXBOX v3.5 revision 1.6, Public-Release
MEGA UPDATE - OLD VERSIONS ARE OBSOLETE 


What is new added, changes and improvements:

MAIN

Introduced HTI Firmware version 00.49
New in firmware 00.49:

- added: boot mode switch function
- improved: serial and flash bus communication routine
- added: dct4 product data calc algorithm
- added: broadcom sec.repair algorithm

please Update HTI by using "Update HTI" button !

- uistyle updated
- HTI identity now displayed on Dongle Maintenance
- HTI serial displayed on connection tab
- added: support for HTI PLUS (MXBOX ORANGE) interface




Nokia Tool

- bugfixed: NCK send for PA_SIMLOC30 (error 0x1)
- added: HTI Standalone function for DCT4 PRODUCT/BT/WLAN DATA fix.
(required HTI FW version 00.49 or later)
- added: BB5 security repair function by USB for RAP3Gv4, RAPUv2, BROADCOM(BCM21351)
- added: BB5 security repair function by HTI for RAPUv2
- improved: BB5 security repair function on all supported ASIC


Note for BB5 security repair function:
Works standalone with HTI connected
Required HTI FW version 00.49 or later

This function includes:
- FULL RPL BACKUP
- SX4AUTH (PA_SL/PA_SL2/PA_SL3/PA_SIMLOC30)
- SD REPAIR (PA_SL/PA_SL2/PA_SL3/PA_SIMLOC30)
- SIMLOCK REPAIR (PA_SL/PA_SL2)
- NCK CALC (PA_SL/PA_SL2)
- SL3 BF HASH CALC (PA_SL3/PA_SIMLOC30)
- SL3 NCK CALC (PA_SL3/PA_SIMLOC30, 15 digit NCK)


Phones supported by HTI:
- Any RAPUv1, RAPUv2, RAP3Gv3, RAP3Gv4 and RAPIDO phones.

Phones supported by USB:
- Any RAPUv1, RAPUv2, RAP3Gv4, RAPIDO and BROADCOM(BCM21351) phones.

Supported ROOT KEY HASH: 
ALL HASH supported !


sl3bf(Local SL3 Bruteforce) module changes
- added: support for oclHashcat-lite-0.08

sl3u(SL3 Logger) module changes
- added: Online Logger page
- and more minor bug fixed



SL3 UNLOCK
SL3 Logger/Unlocker (sl3u.exe)
- added: support for RAP3Gv4, RAPUv2 by USB
- added: Online Logger tab
used to request unlock codes by imei+hash (.sha files)


How to unlock SL3 with HTI:
1. Register HTI to use this service
(choose your password here !)

2. Top up HTI credit to be able to use this service

3. Login using password chosen when registration

4. Upload Hash, select sha or log files

5. Wait for few minutes (As displayed on waiting time)

6. Job Status are displayed once you Upload Hash and everytime you Login
use Login button, to check or request codes for uploaded hash(if any)

7. When status is "finished", right click on individual hash and select one of menus


- Abort/Cancel Job: will cancel job and refund credit
(only available when job is "pending")
- Send Codes to the phone: Send codes directly to the phone
- Save Codes to text: Save codes to text file
- Copy Codes to clipboard: Copy codes to clipboard



NOTE for SL3 Unlock: 
SL3 Unlock is in beta stage
Beta test resellers will be chosen.
This resellers can chose their beta test users.
To be a beta test user please contact your reseller.





Links to download MxBox/MxKey v3.5 rev1.6 for FREE 
http://www.megaupload.com/?d=VQZC8PT5



Saturday 10 December 2011

Transfer Video / Music / Contacts from iPhone or iPad to PC Without iTunes


How to Transfer Video / Music / Contacts from iPhone or iPad to PC Without iTunes ? Well, since the iTunes was launched by Apple , it hasn't received any major updates. However , luckily , there have been several ways to use iTunes to transfer Media from your iOS device to your PC and vice versa. The file transfer software allows to move anything from the iDevice to the Windows Pc or Mac and the other way around.
DigiDNA's DiskAid 5 has just received a major update that allows for iOS to Windows or Mac OS X transfers. There are two versions of the app , the paid one and the free one . With this you might never need iTunes again.


The paid version has more features just like the paid version of any app. It allows for video , music , contacts, and text messages transfers to your computer. However it comes at a price of $25 , after which you can license the software.


However , there is also a free version allowing for unlimited file transfer from all the iOS devices to the computer and also giving the access to the Camera Roll and the iOS file system. The free version also enables you to turn the iDevice into a portable USB storage device.


The app can be downloaded from the official site of DigiDNA